dry goods

Showing 28–36 of 52 results

  • NT Labs – Paratonical 100ml

    Suitable for coldwater & tropical aquariums, Botanical support for recovery from parasitic infections.

    When to use?

    Aquarium Paratonical is a unique blend of botanical extracts formulated to support the fish with their recovery from protozoan parasitic infections such as whitespot, velvet, Trichodina, Costia, Oodinium and flukes.

    Paratonical can be used in conjunction with other medications and can be safely used in the presence of invertebrates.

    Do:

    • Check water quality using Aquarium Lab test kits before use.
    • Calculate the volume of your aquarium in litres (length x width x depth (in cm)/1000). Alternatively use the dosage calculator below and we will calculate it for you!
    • Remove adsorbent filtration media (activated carbon, phosphate remover) from filters for the treatment period.
    • Shake the bottle thoroughly before use.
    • Use provided pipette to measure required dose and slowly add dose to aquarium.
    £9.99 Buy now
  • NT Labs – Anti-Fluke and Wormer 20ml

    When to use?
    Fish (especially Discus species) are susceptible to internal worms. An obvious sign is when fish become very thin but still continue to feed.

    Use when fish become lethargic, fins are clamped, thin looking, gasping and showing signs of rubbing/irritation.

    How to use?

    • Increase aeration in the aquarium to maximum.
    • Shake the bottle thoroughly for at least 30 seconds.
    • Using the pipette provided, add the required dose.
    • If the water becomes cloudy, change 50% at a time until the cloudiness goes away.
    • The treatment can be repeated once a week up to 4 doses.

    Warning: This product will kill snails, shrimps and other invertebrates.

    £5.99 Buy now
  • NT Labs – Disease Solve 100ml

    When to use?
    Disease causing pathogens will be present in most aquariums although at low enough levels for fish not to show any symptoms.

    Disease Solve helps to keep these pathogens under control to ensure your fish stay healthy. Disease Solve can also be used to disinfect live foods to prevent the introduction of disease.

    How to use?

    • Calculate the volume of your aquarium in litres: Length x Width x Depth/1,000. Alternatively, use our Dosage Calculator to help you.
    • Shake the bottle thoroughly before use.
    • Mix required dose of treatment with 1 litre of aquarium water.
    • Add slowly to aquarium.
    • After 7 days change 1/3 of the water and continue water changes weekly until the colour has gone.

    Warning:
    The use of this product will colour the aquarium water green.  This colour will persist for at least one week and indicates that the active ingredients are present in the water.  After successful completion of the treatment, the remaining colour can be removed through partial water changes and/or use of Activated Carbon.

    £5.99 Buy now
  • NT Labs – Anti-Ulcer & Finrot 100ml

    When to use?
    Certain species of bacteria such as Aeromonas and Pseudomonas cause fin, mouth and body tissue to be eaten away. Early diagnosis is essential to prevent the infection becoming fatal.

    Use when fish have red wounds, ulcers, missing scales, red blotches, rotting fins or eroded mouth tissue.

    How to use?

    • Calculate the volume of your aquarium in litres (length x width x depth (in cm)/1000). Alternatively, use our Dosage Calculator to help you.
    • Shake the bottle thoroughly before use.
    • Mix required dose of treatment with 1 litre of aquarium water.
    • Add slowly to aquarium.

    Warning:
    This product will colour the water yellow. It will also stain skin and clothing, but is harmless to the filter bacteria and all species of fish and plants. Wait until the colour has faded, or at least 5 days, before carrying out water changes except in an emergency.

    £5.99 Buy now
  • NT Labs – Swimbladder Treatment 100ml

    When to use?
    Fish use their swimbladder for buoyancy and stability. When it becomes infected with Aeromonas or Pseudomonas bacteria, it can cause stress, which may result in death.

    Use when fish become lethargic, have clamped fins, are unstable in the water, hanging at the surface or lying on the bottom.

    How to use?

    • Calculate the volume of your aquarium in litres (length x width x depth (in cm)/1000). Alternatively, use our Dosage Calculator to help you.Shake the bottle thoroughly before use.
    • Mix required dose of treatment with 1 litre of aquarium water.
    • Add slowly to aquarium.
    • Treatment can be repeated 7 days after last dose. If you feel a second dose is required, first check your diagnosis is correct, test your water quality using NT Labs Test Kits and carry out a 30% partial water change.

    Warning:
    This product will colour the water yellow. It will also stain skin and clothing, but is harmless to filter bacteria and all species of fish and plants. Water changes can be performed after 5 days of treatment to remove any remaining colour.

    £5.99 Buy now
  • NT Labs – Anti-White Spot & Fungus 100ml

    When to use?
    White spot is a protozoan parasite; the adults live on the fish and appear as tiny white spots. The adult has a complex life cycle which results in hundreds of free-swimming juveniles looking for a host fish to infest.

    Use when small white spots, like grains of salt, can be seen scattered on the body of the fish, if the fish are showing signs of irritation and rubbing on objects in the aquarium, fish have a grey, velvety film all over the body, or fish have white cotton wool-like growths on their body/mouth/ fins.

    How to use?

    • Calculate the volume of your aquarium in litres (length x width x depth (in cm)/1000). Alternatively, use our Dosage Calculator to help you.
    • Shake the bottle thoroughly before use.
    • Mix required dose of treatment with 1 litre of aquarium water. Add slowly to aquarium.

    Warning:
    This product will colour the water green and will also stain skin and clothing. The colour in the aquarium could take a few days to fade after the course has finished. Water changes can be carried out after the colour has faded. Changing water between doses is not recommended, except in an emergency.

    £5.99 Buy now
  • NT Labs – Anti-Parasite 100ml

    When to use?
    Certain species of parasites such as Trichodina, Costia, Oodinium and flukes can cause fish to produce a whitish mucus layer, known as velvet or slime disease.

    Use when fish appear to be covered in a whiteish film, have damaged fins, show signs of irritation or are gasping at the surface.

    How to use?

    • Calculate the volume of your aquarium in litres (length x width x depth (in cm)/1000). Alternatively, use our Dosage Calculator to help you. Shake the bottle thoroughly before use.
    • Mix required dose of treatment with 1 litre of aquarium water.
    • Add slowly to aquarium.

    Warning:
    This product contains copper, which will kill snails, shrimps and other invertebrates, use half dose in the presence of copper-sensitive species.

    “Comprehensive and easy to use, I often like to have a couple of bottles of Anti-Internal Bacteria treatment or Disease Solve to hand. Nice to know that I’m not the only one who rates these products!” Nathan Hill, the Associate Editor of Practical Fishkeeping Magazine

    £5.99 Buy now
  • NT Labs – Anti-Internal Bacteria 100ml

    When to use?
    Certain species of bacteria such as Pseudomonas, Aeromonas and Vibrio bacteria can infect fish internally, causing an array of symptoms.

    Use when fish become lethargic, have clamped fins, stop eating and have red blotches on fins or under body.

    How to use?

    • Calculate the volume of your aquarium in litres (length x width x depth (in cm)/1000). Alternatively, use our Dosage Calculator to help you.
    • Shake the bottle thoroughly before use.
    • Mix required dose of treatment with 1 litre of aquarium water.
    • Add slowly to aquarium.
    • This treatment can be repeated every other day up to four applications if necessary.
    • If the aquarium water has a KH of 12 dKH or more and a pH of 7.5 or more, the dose can be doubled.

    “Comprehensive and easy to use, I often like to have a couple of bottles of Anti-Internal Bacteria treatment or Disease Solve to hand. Nice to know that I’m not the only one who rates these products!” Nathan Hill, the Associate Editor of Practical Fishkeeping Magazine

    £5.99 Buy now
  • NT Labs – Algae Gone 100ml

    When to use?
    Green water/algae caused by over feeding and fish waste is unsightly in an aquarium, and can be dangerous as it may alter the pH and oxygen levels. Algae Gone is a single-dose, plant-friendly treatment that will clarify the green or cloudy water in your aquarium. It works by clumping the minute particles together enabling your filter to strain them out.

    Algae Gone will also help to lower algae- causing phosphate, thereby promoting a healthier aquatic environment. Use when the water has become green or cloudy.

    How to use?

    • Calculate the volume of your aquarium in litres (Length x Width x Depth (in cm)/1,000). Alternatively, use our Dosage Calculator to help you.
    • Shake the bottle thoroughly before use.
    • Mix required dose of treatment with 1 litre of aquarium water.
    • Add slowly to aquarium.

    Warning:
    Keep your aquarium away from direct sunlight and test your water for algae-fertilising nitrate using NT Labs Test Kits.

    £5.99 Buy now